Ordinary woodworking machinery can be utilized for cutting, sawing, drilling, and mortise opening in WPC.
To secure the joints on the decking, expansion tubes are used with a fixed point spacing of 500mm to 600mm. The screw nail cap should be positioned lower than the joint surface for optimal installation. It's important to ensure that the content generated is similar in meaning to the original text while rearranging the words and sentence structure.
When it comes to using screws with WPC, there are a few important points to remember. Firstly, self-tapping screws can be used between WPC and WPC. However, if you're using them outdoors, it's highly recommended that you opt for stainless steel screws. This will ensure that the screws last longer and are less likely to rust or corrode.
If you're fastening WPC to steel plates, on the other hand, it's best to use self-drilling and tapping screws. This will allow you to easily drill through the steel plate and tap into the WPC material to create a strong, secure connection. By following these guidelines, you can ensure that your WPC projects are sturdy, long-lasting, and able to withstand a variety of weather conditions and other environmental factors.
It is necessary to pre-drill before using tapping screws for fastening. The pre-drilled diameter should be no larger than 3/4 of the screw diameter.
During the installation of outdoor decking, it is necessary to use screws between each joint on the left and right sides of the decking.
In the connection site, plastic buckles are used to fix the WPC decking and joints together. It is an effective method of fastening the components securely.
